Pipes and pipes..........

I have put in the front to back brake pipe and the flexi to the axle. I have also put in the new fuel pipe from the tank to pump and back again but I've used metal fuel pipe rather than the plastic one. I made up the small front caliper brake pipes myself, they don't look factory but I know there ok. I have put a new clutch kit in,so much easier when the engine and gearbox are out of the car and at chest hieght. I lowered the engine and box into place on thier mounts and all seems good. The exhaust front front pipe! This lovely part of the exhaust, a nightmare to change when everything is back together. I decided that if Land Rover had put a join in the pipe on the straight part that runs level to the sump, then you could remove the pipe in two sections and not have to dismantle so much around it.

 .............I will post a picture of the front exhaust pipe when I decide what i'm doing.........

As you can see I've decided that the next plan of attack for my little helper (my nine year old) is to strip the bulkhead I'll be using to replace the rotten one. Again its work in progress so whatch this space.